

|
|
|
Specification: |
|
Wavelength range: 200-1000 nm, autoscan |
|
Slit width: 2 nm |
|
Wavelength accuracy: ±1.0 nm |
|
Wavelength setting repeatability: <=0.2 nm |
|
Wavelength display: In steps of 0.1 nm |
|
Wavelength calibration: Automatic at start |
|
Measurement range: 0-125 %T; -0.097-2.70 A; 0-1999 C (0-1999 F) |
|
Photometric accuracy: ±0.002 Abs (0 to 0.5Abs), ±0.004 Abs (0.5 to 1.0 Abs),±0.5 %T |
|
Photometric repeatability: ±0.001 Abs (0 to 0.5Abs), ±0.002 Abs (0.5 to 1.0 Abs),±0.2 %T |
|
Stray light: 0.2 %T (at 220,340,420 nm) |
|
Baseline flatness: =±0.005 Abs |
|
Baseline stability: =0.004 Abs / 30min (at 500 nm, when measured at 2 hours after energization) |
|
0%T Line noise: =±0.1 %T(at 500 nm, when measured at 2 hours after energization) |
|
100%T Line noise: =±0.3 %T(at 500 nm, when measured at 2 hours after energization) |
|
Light source: Automatic changeover linked with wavelength.Changeover point is set at 340 nm. |
|
Display: 20 X 2 LCD |
|
Data output: Digital, RS232 serial |
|
Mini – impact printer: Equipped with mini-printer |
|
Power consumption: (220V 10% 50Hz 150VA) or (110 V 10% 60Hz 150VA), switchable |
|
Standard sample holder: 4-position sample holder |
|
Actual dimensions: Spectrophotometer mainframe 456 W x 375 D x 220 H mm (18.0 W x 14.8 D x 8.7 H in) |
|
Net weight: 19.0 Kg (42 lbs.) |
|
Shipping dimensions: Paperboard container 625 W x 520 D x 348 H mm (24.6 W x 20.5 D x 13.7 H in) |
